Air Conditionaing Shell Automatic Paint Spraying Equipment Japan
THK Guide Rail
Easy to operate Automatic Paint Spraying Equipment for Air
conditionaing shell
The five axis reciprocating spraying machine with air spraying
system will help you get a good coating film and reduce the manual
cost. The details of automatic five axis spraying machine are as
follows.
1. This machine is widely used in many industry. Generally speaking
, standard type of this machine has two product tray. If you want
to buy a machine with four product tray, then you will get double
yield under the premise of high quality coating.
2. It is easy to debug the machine. You can finish debugging for
usual product in 15 minutes. The program writing of machine is
regard one plane of product as a program segment. When you finish
setting the start point , end point and the spraying speed, then
you have finished a program segment. After finish every program of
plane, then the complete program is finished.
3. This machine has continuous spraying method and step spraying
method.
4.The atomization and sector, painting output of spray gun can be
controlled by computer. When the machine begin to spray , the spray
gun can blow, in order to blow dust.
5. It is easy to use this machine ,and you can store 160 programs
of product. The machine operated by fully digital computer.
Control system | - Japanese OMRON PLC
- Taiwan WEINTEK Color industrial touch screen
- Schneider Electric switch and Power Supply
4. Japanese OMRON relay |
Drive system | Japanese Panasonic servo drive system |
Transmission system | 1. Aluminium profile module 2. Japan THK Linear guide rail 3. Japan THK Silent slide 4. Precision synchronous wheel 5. Italy Megadyne Synchronous belt with steel wire 6. positioning accuracy difference ±1mm |
Product exchang platform | - Precision divider
- Taiwan CPG Gear motor
3. Japanese Mitsubishi frequency converter |
Product rotation platform | - Precision divider
2.Can be 90 degrees, 180 degrees rotation, continuous rotation |
Spray gun | Japanese ANEST IWATA |
Paint supply system | - Amercian GRACO 308 diaphragm pump
- Pneumatic agitator produce from Taiwan,China
- Taiwan AIRTAC Solenoid valve, Pressure regulating valve, Pressure
gauge
|
Power supply | AC220V50HZ, Single phase three wire |
The detailed configuration of the robot has written in the form,
you can see our automatic spraying painting machine's configuration
is high ,so the failure rate of machine is very low. If i were you
,i would buy a high quality machine if i want to buy a machine from
abroad. Then, why don't you choose us?
Product details
Exhibition
FAQ:
Question 1: I don't know anything about the machine. Will you
provide the technical support?
Answer: Sure. Every machine will be test before delivery. We will make
sure there is no problem for the machine.
You may send 2-3 smart workers to come to our factory to learn how
to operate the machine.
When the machine arrives your factory, we will send the experts to
your factory to help for installation. Operation training will be
provide. It may take about 20-30 days. Maintenance tips will be
given.
Also, we provide consulting service for creating the proper
facilities for running the machine.
Question 2: What is price of the machine?
Answer: The machine is custom made. If you have any drawing or any
information on specification of the machine, please send to us for
quote.
If you are totally new in this area, please tell us the max.
dimension of your products, its application, and your desired daily
capacity.
We will provide our professional suggestions and work out an
appropriate design for your project.
Question 3: What kind of pre-treatment I need to do before loading
to reciprocator?
Answer: the products have to be CLEAN AND DRY.
Question 4: Is it safe to operate the machine?
Answer: The machine provides security setup and all mechanical units can
be controlled from touch screen. So the machine itself is very safe
to use.
